Need help?Do you have a question about the E-MAG E-113 and is the answer not in the manual?
Outlines installation steps, including drive gear recovery and mounting procedures for the ignition.
Explains connecting control leads, MAP sensor, and spark plug harnesses for proper ignition function.
Describes two preprogrammed timing curves selectable via a jumper for different engine configurations.
Step-by-step guide to setting the ignition timing using the LED indicator and rotating the engine.
Verifies spark plug wire assignments by checking spark firing order for correct cylinder connections.
Covers engine starting procedures and the importance of a robust electrical system for ignition operation.
Details how to properly stop the engine and power down ignitions to prevent battery drain.
Covers P-MAG alternator check, emergency power, and prop starting procedures.
To Next Page
General