POWER ASSISTED BICYCLES
Your Lithium Battery arrives partially charged.
Your Battery can be charged on or o your bike.
1. Plug your charger into the mains, the LED light will illuminate GREEN
2. Connect the charger to the battery using the lead provided, the LED light on
the charger will change to RED. This indicates it is charging.
3. Once Fully charged the LED light on the charger switches back to GREEN
indicting the battery is fully charged, and then goes o.
Your Battery indicator lights.
When fully charge all 4 indicator lights on your battery will light GREEN
and will go out as the power is drained.
Press the button next to the indicator lights to check power, remember -
the battery must be switched on to do this.
Basic rules to follow when charging your battery
1. Do not cover charger with any material of substance that may restrict
airflow to the charger. The charger needs to ‘Breath’ to keep cool.
2. Charging your battery each time you use it no matter how far the trip, will
prolong the life of the battery.
3. DO NOT leave the battery discharged for long periods.
4. Never open the charger or change settings on charger.
Charging your Battery
To fully charge your battery
takes approx. 2-3 hours
11
Fig.23
Charging port
To Next Page
Loading...