E Rider Model 15 - User Manual

USER MANUAL AND ASSEMBLY INSTRUCTIONS
Congratulations, once again, on buying an E RIDER Model 15!!!!
USER MANUAL
We are sure you will be excited by the delivery of your brand new bike
and you will be eager to start using your E RIDER as soon as possible.
However you will need to be a little patient as there are some
important things to be done before you can ride it.
Firstly, the bike cannot be fully assembled for safe delivery so please
refer to our Assembly Instructions below and follow them closely to
put your bike together safely.
Secondly, during the time your E RIDER has been in transport and
storage, its battery will have lost some charge.
Before using the bike you must put the battery on charge. Plug the
charger to a power socket and you should get a green light on the
transformer. Attach the charger to the battery and this should turn
red. Wait until it turns green again and it is now fully charged.
The other important thing you must do is inflate your tyres to the
correct pressure of 40psi. This can be done with any pump or
compressor fitted with a Schrader fitment (same as for a car tyre).

Summary

USER MANUAL

Initial Setup and Preparation

Guides on charging the battery and inflating tires to the correct pressure before first use.

General Usage Guidelines

Covers maximum load, operating in wet conditions, and battery charging frequency.

Bike Operation and Starting

Details unlocking the motor, adjusting mirrors, and starting the bike via key or remote.

Controls and Remote Functions

Explains handlebar buttons, downhill precautions, and remote control features.

ASSEMBLY INSTRUCTIONS

Unpacking and Initial Inspection

Guides on carefully removing packaging and checking for damage to the charging cable.

Handlebar Installation

Instructions on removing the securing bolt and attaching the handlebars to the stem.

Front Mudguard Installation

Steps to identify and secure the front mudguard to the forks using short bolts.

Front Wheel Assembly

Guides on inserting the brake mechanism, aligning the wheel, and securing the axle bolt.

Nose Cone Fitting

Instructions for connecting indicator block and fitting front fascia with self-tapping screws.

Back Rest Attachment

Details on opening the back box and fitting the back rest using larger self-tapping screws.

Pedal Installation

How to attach pedals using a 15mm spanner, noting left/right tightening directions.

Mirror Mounting and Adjustment

Instructions for identifying mirror holes, tightening securing nuts, and adjusting angle.

Footrest Trim Installation

Steps to fit the rear trim using short bolts and a screwdriver/spanner.

E Rider Model 15 Specifications

General

Motor Power	250W
Max Speed	25 km/h
Brakes	Disc Brakes
Lights	LED Headlight and Taillight
Charging Time	4-5 hours
Max Load	120 kg