E-Slide ES1410D - Front Fender Assembly; Back Fender Assembly

Page21
WARNING assembly/disassembly of mud guards make sure
the Balance Bike in "parking position" (stand in the open
position, on a flat surface or slope or hilly), that the charger
is unplugged and that the balance of the bike is off) off).
WARNING be sure to respect the manual and fixtures that are
described in this manual. It is important to prevent all errors of
fitting.
Unpack the mudguards, the smallest attaches to the front with
the screw and nut provided, the largest attaches to the rear with
the screw and nut provided.
Front fender Assembly:
Back fender Assembly: