WARNING start-up make sure the balance bike is in "Park" (stand
in the open position, on a flat surface or slope or hilly), ring of
folding, safety, closed/tightly clamping ring, than the charger pin
is unplugged and that the balance bike is off (off). The Balance
Bike must be put in position "parking" on a flat surface, slope or
hilly.
ii) Turning On / On the Balance Bike
Insert the spanner for this purpose in the lock, which allows
the tension of the Balance Bike to put your Balance Bike
under tension. The lock is located right side of the handlebar
below the LED digital display. Use the keys (1 pair) provided.
Insert the key into the lock, which is located on the right side
handlebar and turn the key to the right to turn the Balance
Bike powered (mode ON).
To Next Page
Loading...
