Need help?Do you have a question about the e-survey E300 Pro and is the answer not in the manual?
Essential safety guidelines to prevent injury and property damage during device use.
Outlines conditions under which the manufacturer disclaims responsibility for damages.
Details the physical components and design of the E300 Pro GNSS receiver.
Explains the meaning of different colors and patterns of the indicator light for status monitoring.
Describes how to interpret the battery indicator to check the remaining battery level.
Details the functions and usage of the device's power button for various operations.
Defines the connections and pinout for the 5-pin port used for external devices and power.
Displays current positional data, including coordinates, height, and satellite status.
Shows the status of the current data link connection, such as Bluetooth.
Allows viewing satellite status, skyplot, and setting cutoff angles for GNSS reception.
Provides comprehensive information about the receiver, GNSS board, network, and UHF components.
Enables configuration of the device's system mode and raw data recording settings.
Allows configuration of satellite systems, RTK timeout, and surefix settings for optimal performance.
Configures time zone, baud rates, speaker, alerts, power management, and network settings.
Configures NMEA data output format, rate, and recording options via Bluetooth or 5-pin port.
Provides access to view and download application and operating system logs for troubleshooting.
Allows downloading raw GNSS data and NMEA data, and converting data to RINEX format.
Enables downloading and deleting collected point data that is automatically backed up.
Manages firmware updates, device registration, security settings, disk formatting, and factory resets.
Instructions for inserting a SIM card to enable network working mode.
Details the process and indicators for charging the device's battery using a Type-C charger.
Explains how to connect the device to an external power source via the 5-pin port.
Guides on installing the UHF antenna for internal radio communication.
Explains how to measure and input antenna height for accurate GNSS measurements.
Guides on enabling and performing tilt measurements using the E-bubble feature.
Guides on enabling and performing tilt measurements using the IMU sensor.
Details the internal radio's transmission power, channel frequencies, and supported communication protocols.
Lists and describes the standard accessories included for the base station and rover.
To Next Page
General
