© 2020 E2 Scientific Corp. Version 5.20.2020. All rights reserved.
Maximum Strength. This exercise measures the highest pressure achieved when applying pressure to the
bulb. To perform the exercise:
1. Open the Maximum Strength module.
2. Place the bulb on your tongue and squeeze it against the top of your mouth as hard as you
can.
3. The meter’s needle indicates the pressure reached.
4. The numerical reading at the bottom of the screen displays the maximum pressure reached.
o The reset button resets the counter to zero.
o The Data Report will store the maximum reading even if a user presses RESET.
Warning: never bite down on the tube or the bulb as
this may result in a choking hazard or cause the device to malfunction.
To Next Page
Loading...