Do you have a question about the Eagle Access Control Systems Eagle I and is the answer not in the manual?
Details 3-wire and 4-wire receiver terminal connections.
Illustrates wiring for various accessories like photo eyes, loops, and locks.
Settings for dip switches #1, #2, #3, #4 for slave operator function.
Details on connecting and configuring master/slave units for synchronized operation.
Using feature selector switches for gate direction, brake, and timer settings.
Sets the operator to function as Master or Slave.
Designates the gate's left or right opening direction.
Guidelines for connecting 120 VAC line input power to the unit.
Critical warnings and instructions to reduce risk of injury or death.
Conditions for operator installation, guarding, and pedestrian access.
| Brand | Eagle Access Control Systems |
|---|---|
| Model | Eagle I |
| Category | Gate Opener |
| Language | English |