Need help?Do you have a question about the Eagle Access Control Systems Eagle-2000 series and is the answer not in the manual?
Installation requirements and safety for gate operators.
Critical safety warnings and operational guidelines.
Classifications for residential and commercial gate operators.
Guidance on placing warning signs on gate sides.
Advice on mounting devices and gate safety.
Tips for preventing injuries on specific gate types.
Recommendations for gate post stops and catch rollers.
Safety assurance for installing positive stops on the gate track.
Importance of installing "over travel stops" to prevent derailing.
Procedure for installing the gate operator chain and sprocket.
Recommendations for level and secure operator mounting.
How to set gate opening direction using the Feature Selector.
Wiring instructions for connecting power to the operator unit.
Explanation of loops to prevent closing on vehicles and automatic opening.
Adjusting sensitivity for opening and closing based on gate weight.
Description of the 8-station switch system for settings.
Details on Master/Slave, Gate Opening, and Motor Brake settings.
Details on Reverse Loop, One Pass, Stop-Reverse, Alarm Reset, Close Timer settings.
Connecting power and using communication wire for master/slave.
Selecting features and connecting accessories to the master operator.
Setting switches for slave operation and its specific functions.
Configuring Open-Delay and Close-Delay functions via switches and timer.
Connecting 24VDC output for MAG locks or solenoids.
Connecting 12VDC alarm and 24VAC power for accessories.
Visual guide for connecting various accessories to the operator.
Detailed explanation of Reverse Loop, Phantom Loop, Exit Loop, Stop, Keypad, Close, Edge Sensor inputs.
Wiring for 3-wire or 4-wire receiver terminal.
Procedure to adjust cams for proper gate stoppage.
Instructions for manual gate release using crank.
Manual release for Fail Safe system and using Fire Box.
Recommendation for installing Edge Sensors for safety.
Procedure to reset the motor using the red reset button.
Explanation of various LEDs on the control board for status.
Table of symptoms, causes, and remedies for operator issues.
Key points to check regarding switch settings and connections.
Diagram showing the assembly of Eagle-2000 parts.
Diagram showing the assembly of Eagle-1000 parts.
Detailed list of parts for the Eagle-2000 model.
Detailed list of parts for the Eagle-1000 model.
General| Brand | Eagle Access Control Systems |
|---|---|
| Model | Eagle-2000 series |
| Category | Gate Opener |
| Language | English |
To Next Page
