Eagle Access Control Systems Eagle-2000 series - Receiver and Limit Switch Setup; Receiver Connections; Setting The Limit Switches

Slide Gate Operators / Eagle-2000 Series / Eagle-1000 Series
____________________
Receiver Connections
Gate Travel Distance / Setting The Limit Switches
The limit switches must be set so that the gate stops at the proper
position. Follow these instructions to appropriately set the limit switches.
4-Wire Connections
3-Wire Connections
The receiver terminal is mounted on the control box for easy
installation and is pre-wired for a 3-wire or 4-wire receiver.
____________________
Adjust cams for
proper stoppage
Be sure that the locking plate
is locked into place after each
adjustment
Limit Switches
Distributed by AFW Access Systems • www.AnchorMiami.com/afwas
(18)
Limit Switches
When installing 4-wire,
use terminals 1 & 2.
For relay connection
and 24 VAC Power,
use terminals 3 & 4