Need help?Do you have a question about the Eagle Supra I.D. and is the answer not in the manual?
Guides on checking power cable connections, wiring, fuse, and battery voltage to resolve power issues.
Offers solutions for unit malfunctions, including electrical noise, cable inspection, and connector checks.
Details causes for poor bottom readings or missing fish signals, such as transducer orientation and cleanliness.
Explains the automatic mode which adjusts range and sensitivity based on water conditions for optimal display.
Details how to adjust the depth range when the unit is in manual mode for better target visibility.
Describes how to use the zoom feature in automatic mode to enlarge specific sections of the sonar display.
Describes the default display mode, which includes automatic features, Fish ID, and digital depth.
Describes the High Speed Scroll mode, which turns off automatic features and digital depth display.
Details how to set and use the fish alarm, which sounds an audible alert when fish symbols are detected.
Explains the shallow and deep depth alarms that sound when the bottom depth exceeds or falls below set limits.
Instructions on setting the shallow alarm to alert when the bottom becomes shallower than a specified depth.
Instructions on setting the deep alarm to alert when the bottom becomes deeper than a specified depth.
To Next Page
General
