10
Head combination switch
Plus button
Minus button
Power button
Throttle
Info-switch button
Bell
Headlight button
Shifter
Power button
Long press to start working and power the controller. In the boot state, long press the button to turn
off the power supply.
Plus button
Short press key to switch the electric vehicle power gear to change the output power of the motor.
Press and hold for three seconds to turn on the high beam.
Minus button
Long press to a power implementation state, the bike travels at a constant speed of 3km/h Also,
screen display works. Release the button immediately returns to the booster state.
Info-switch button
Short press the key display information switches between the total mileage (km), single mileage (km),
maximum speed (km/h), and average speed (km/h).
Headlight button Press the button to turn on the near-light lamp and press it again to turn off the near-light lamp
.
In the factory default setting, if the electric vehicle is not used for more than 10 minutes, the instrument will automatically shut down.
To Next Page
Loading...
