Earmor M20T - Wear Instructions; Earbud Insertion and Fit Confirmation

Turn off the power before wearing. Keep earpiece clean before installation.
1. Choose the suitable eartips size for your ear canal
2. Hold the earplugs M20T to confirm that they are clean and dry, and rub the sponge earplugs finely
3. Gently pull the ear upwards and insert the earbud into the ear canal
4. After inserting into the ear canal, keep the earplugs straight for about 20 seconds and rebound
5. In the case of shutdown, check that the eartips size is appropriate
Try pulling the Earpieces gently to make sure it won’t come loose easily. If it comes out easily, please repeat the above steps.
WEAR INSTRUCTIONS
1
4
3
5
S M L
222