EasyManua.ls Logo

Earmor M20T - Operating Instructions; Warnings; Warranty Information; Contact Information

Default Icon
7 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Take out the charging box: the earbuds will automatically turn on after they are taken out
Power on by hand: When the earbuds is turned off, you need to press and hold the button on the left and right ears for 3 seconds to
turn it on respectively. Release the button when you hear the prompt sound "power on", and the earbuds is turned on and in outdoor
mode.
2. Mode switching: click any button on the left or right to adjust the mode, the order is: outdoor→indoor→mute→outdoor→indoor.
3. Device pairing: Take out the earbuds, it will automatically turn on, and then enter the pairing mode (red and blue lights flash
alternately), the pairing name is "M20T", after the pairing is
successful, the LED stops flashing, and the prompt sound "Connected".
4. Listening to music: After the device is successfully connected, double-click the left and right buttons to play/pause the music.
5. Transparency mode: During music playback, you can click the left and right buttons to adjust the mode.
6. Call mode: When an incoming call is in, click the left and right buttons to answer the call, double-click the button to hang up the
call, and press and hold the button for 2 seconds to reject the call when there is an incoming call.
7. Put it in the charging box and turn it off: the earbuds will automatically shut down after it is placed in the charging box
Hand off: Press and hold the unilateral button for 3 seconds to synchronously shut down, and the prompt sound "power off".
Automatic power off: When not in use, the earbuds will automatically power off after two hours, and the prompt sound "power off".
EARMOR® M20T hearing protector is warranted to be free of defects in material and workmanship for a period of 1 year from the date
of original purchase.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
OPERATING INSTRUCTION:
WARRANTY
For the latest information on EARMOR products and services
Please contact a local distributor or email →
info@earmor.com / cs@earmor.com
EARMOR official website http://earmor.com/ shall prevail in case of any product data changes.
OPSMEN TECH CO., LTD.
Tel: +86 20 81179170 Fax: +86 20 81179171
E-mail: cs@earmor.com / info@earmor.com
Add: Room 601, Building A, No.94 Liwan Road,
Liwan District, Guangzhou , Guangdong Province, China
CONTACT
WARNING
Do not disassemble, puncture, crush, heat or throw batteries into fire
Do not use after severe swelling or immersion in water