Why is my EarthQuake Tiller engine hard to start?
If your EarthQuake Tiller engine is hard to start, drain the old fuel and replace it with fresh fuel. It's also a good idea to use a gas stabilizer at the end of the season. Ensure the spark plug wire is securely attached to the spark plug. Also, make sure the drive safety control levers are released to the neutral position to start the engine.
What to do if EarthQuake Tiller engine misses or lacks power?
If your EarthQuake Tiller engine misses or lacks power, try raising the tines for shallow tilling by lowering the depth regulator lever. You can also remove and clean the fuel tank, or clean/replace the air cleaner. Other solutions include replacing the spark plug and adjusting the gap, or draining and refilling the gas tank and carburetor. If the carburetor adjustment is improper, take it to an authorized engine service center.
Why does my EarthQuake Tiller engine run rough?
If the EarthQuake Tiller engine runs rough and floods during operation, clean or replace the air cleaner.
How to control EarthQuake Tiller that jumps or lurches forward?
If the EarthQuake Tiller is difficult to control when tilling because it jumps or lurches forward, lock the wheels in the tilling position. Alternatively, raise the tines for shallower tilling by lowering the depth regulator lever.
Why does my EarthQuake 7055 6 HP BRIGGS move forward when starting?
If the EarthQuake Tiller moves forward during starting, ensure that the drive safety control levers are released to the neutral position to start the engine.
Why EarthQuake Tiller doesn't move even though tines and wheels turn?
If the tines and wheels turn, but the EarthQuake Tiller does not move, lower the tines for deeper tilling by raising the depth regulator lever.
General| Brand | EarthQuake |
|---|---|
| Model | 7055 6 HP BRIGGS |
| Category | Tiller |
| Language | English |
Steps to record your rototiller's model and serial numbers for warranty validation and easy reference.
Covers defects in material/workmanship for one year; specifies exclusions and conditions.
Owner's duty for safe assembly, use, and maintenance; includes general safety instructions.
Key safety instructions to read and follow for safe operation and control of the tiller.
Guidance on proper attire, area inspection, and specific safety measures before operation.
Illustrations and explanations of safety labels placed on the rototiller for user reminders.
Notice regarding potential cancer or reproductive harm from engine exhaust.
Step-by-step instructions for starting the engine, including cold and warm starts.
Guidance on setting throttle for idle and operating speeds, and proper engine shutdown.
Instructions for engaging tines, adjusting depth, and basic tilling operations.
Explanation of forward and reverse drive safety control levers and their operation.
Instructions for using wheel lock pins and lockouts for tilling and transport positions.
Procedure for adjusting the handlebar height for optimal operator comfort.
How to adjust the depth regulator lever to control tilling depth.
Procedure for adjusting belt tension to ensure proper performance.
Advice on selecting tilling depth and maintaining control for effective soil preparation.
Specific tips for using the rototiller for cultivating garden beds.
Schedule for regular checks and maintenance operations to ensure optimal performance.
Detailed steps for removing and installing the forward and reverse drive belts.
Instructions for engine oil checks, changes, air filter service, and spark plug maintenance.
Procedures for checking transmission grease and tire pressure for optimal operation.
Steps for lubricating moving parts and preparing the rototiller for extended storage.
Identifies frequent issues with the rototiller and provides step-by-step remedies.
Exploded view and part number list for the rototiller's handlebar components.
Exploded view and part list for the rototiller's tines, hood, and related components.
Exploded view and part list for the rototiller's motor mount assembly.
Exploded view and part list for the rototiller's wheel and tiller shaft assemblies.
Instructions for assembling and attaching the hiller/furrower kit to the rototiller.
To Next Page