mini D nmpurlER WIRING PREPARATIONS
0' Test the alternator output. Factory alternators will produce 60 - 80 amperes at
best. Wear and heatwill reduce the output by 40% .
0' Alternator ground (-) must be reinforced. Use a 4-gauge cable instead of the
factory 8-gauge.
0' Alternator positive (+) to battery (+) must be reinforced . Use 4-gauge cables.
0' Checkyour battery condition as batteries degrades aftera whole.
0'
Battery (+) to amplifier (+) must be connected using a 4-gauge cable .
0' Ground amplifier to vehicle's chassis (bare metal) using 4-gauge cable, keep
the cable short (2 feet max) .
0' Use 1 Farad capacitorto compensate for surges in demando
0' We recommend the use of one (1) auxiliary battery.
.,
Specifications are subject to change without notice
6
To Next Page
Loading...
Need help?
General
