Specifications are subject to change without notice
6
MiNi D AMPLIFIER WIRING PREPARATIONS
Test the alternator output. Factory alternators will produce 60 - 80 amperes at
best. Wear and heat will reduce the output by 40%.
Alternator ground (-) must be reinforced. Use a 4-gauge cable instead of the
factory 8-gauge.
Alternator positive (+) to battery (+) must be reinforced. Use 4-gauge cables.
Check your battery condition as batteries degrade after a while.
Battery (+) to amplifier (+) must be connected using a 4-gauge cable.
Ground amplifier to vehicle’s chassis (bare metal) using 4-gauge cable, keep
the cable short (2 feet max).
Use 1 Farad capacitor to compensate for surges in demand.
We recommend the use of one (1) auxiliary battery.
To Next Page
Loading...
Need help?
General
