Need help?Do you have a question about the EarthQuake mini D Series and is the answer not in the manual?
Adjusts amplifier sensitivity to match audio source voltage.
Details speaker connection, battery, remote, and ground terminals.
Test alternator output, reinforce ground, and check battery condition.
Use 4-gauge cables for battery, amplifier, and chassis ground.
Both bridged amplifiers must be the same model; do not use slave's input jacks.
Illustrates connecting two Mini D2000 amplifiers for a 2-ohm subwoofer.
Details max power, class, output, filters, boost, and protection features.
Provides RMS power output at various impedances and loading conditions.
Adjusts amplifier sensitivity to match audio source voltage.
Details speaker connection, battery, remote, and ground terminals.
Test alternator output, reinforce ground, and check battery condition.
Use 4-gauge cables for battery, amplifier, and chassis ground.
Both bridged amplifiers must be the same model; do not use slave's input jacks.
Illustrates connecting two Mini D2000 amplifiers for a 2-ohm subwoofer.
Details max power, class, output, filters, boost, and protection features.
Provides RMS power output at various impedances and loading conditions.
General| Brand | EarthQuake |
|---|---|
| Model | mini D Series |
| Category | Amplifier |
| Language | English |
To Next Page
