How to troubleshoot EarthWise Snow Blower if the motor does not start?
If the EarthWise Snow Blower motor doesn't start, first ensure the unit is properly plugged in. If it is plugged in, check your power supply to confirm there is electricity. Finally, inspect the cable for any defects; repair or replace it if necessary.
What to do if EarthWise SN72018 has poor results?
If your EarthWise Snow Blower is delivering poor results, the drive belt may be worn or damaged and need replacement. Also, inspect the auger for wear or damage, and replace the rubber plates if needed. Finally, make sure the discharge chute is not blocked; switch off the snow thrower before cleaning it.
Why is my EarthWise Snow Blower vibrating abnormally?
Abnormal vibrations in your EarthWise Snow Blower can stem from a worn or damaged drive belt, requiring replacement. Another potential cause is a worn or damaged auger, in which case you should replace the rubber plates on the auger. Lastly, check the scraper blade for wear or damage and replace it if needed.
What to do if EarthWise SN72018 Snow Blower motor shuts off during operation?
If the EarthWise Snow Blower motor shuts off during operation, it may be due to the current being too high. Restart the snow thrower after waiting for 1 to 3 minutes.
General| Model | SN72018 |
|---|---|
| Type | Electric Snow Blower |
| Clearing Width | 18 inches |
| Motor Power | 13.5 Amp |
| Chute Rotation | 180 degrees |
| Clearing Depth | 10 inches |
| Throw Distance | 30 feet |
To Next Page
