EarthWise SN75022 User Manual

Model SN75022
OWNER’S MANUAL
22-IN Corded Snow Thrower
Copyright All Rights Reserved.
Thank you for your purchase.
DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY,
PARTS, SERVICE QUESTIONS? GO TO AMERICANLAWNMOWER.COM OR
CALL 1-800-633-1501 BETWEEN 8 AM – 5 PM EST, MONDAY-FRIDAY FOR
ASSISTANCE.

SAVE THIS MANUAL FOR FUTURE REFERENCE
This product has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual
before using this product.
Quick Start Instruction
From Page 9

EarthWise SN75022 Specifications

General

Brand	EarthWise
Model	SN75022
Category	Snow Blower
Language	English

Summary

Quick Start Instruction

Important Safety Warnings

General Safety

Check for Damaged Parts

Inspect for alignment, binding, breakage, or other conditions affecting operation.

Ground Fault Circuit Interrupter (GFCI)

GFCI protection should be provided on the circuit or outlet used for the snow thrower.

Avoid Dangerous Environments

Do not operate in gaseous or explosive atmospheres where sparks might ignite fumes.

Disconnect Unit

Keep Children Away

Auger Clearance Check

Surface Type

Assembly

Installing Upper Handle

Steps to align, insert J-bolt, and tighten knob to secure the upper handle.

Installing Chute Deflector

Steps to attach the chute deflector over the discharge chute using washers and knobs.

Installing Center Handle

Steps to align, insert J-bolt, and tighten knob to secure the center handle.

Installing Chute Crank

Steps to install chute crank, secure with cotter pin, and verify operation.

Operating

Turning On and Off

Procedure to turn the snow thrower on using the safety lock off button and bail wire.

Chute Direction and Height

Snow Removal Technique

Removing Snow

Overload Protection

Maintenance

General Maintenance

Regular cleaning, checking fasteners, and storing the unit to ensure efficiency and longevity.

Replacing Auger Belt

Detailed steps for removing and installing the auger belt onto pulleys.

Securing Auger Belt

Instructions for keeping pressure on the belt while rotating the auger to seat it properly.

Replacing the Scraper

Replacing Rubber Plates on Auger

Troubleshooting

Parts and Service

Warranty Policy