5. Operating Instruction
9. Holiday setting
Press button to enter into the holiday start date setting, at this moment 1~3 is bright, hour and
minute blink with display 20:18, press and to adjust year. After adjustment completed, press to
enter into month setting, at this moment hour blink, press and to adjust month. After
adjustment completed, press to enter into date setting, press and to adjust date. After
adjustment completed, press to enter into holiday close date setting, at his moment 4~7 is bright, hour
and minute blink with display 20:17, the setting method is same with holiday start date setting.
After the holiday close date setting completed, "temperature" blink to set temperature,
initial is “--：--”which means the unit is off when holiday start. If use press button to set
temperature, then unit work with set temperature when holiday start. After temperature is setted,
press button to exit the setting. If the holiday setting is successfully, then is bright.
This function is one time timing, after setting successful, the unit will work according to the set
requirements: The unit will execute the shutdown command at 23:00 on the vacation start date. And the unit
will execute the switch on command at 01:00 on the vacation finish date (according to the parameters before
shutdown).
8. Special date timing
Long pressing the
button for more than 3 seconds. The digital light will be light from number 1 to 7 cyclically
every one second, and the 7 numbers correspond to the 7 days of the week. When the
button is released, when the
button is released, the corresponding date time setting can be started. The setting method is the same as weekly
timing setting.
To Next Page
Loading...
