Need help?Do you have a question about the EAS Electric E300WHF and is the answer not in the manual?
Heat pump installation by qualified personnel is required to prevent water leakage, electric shock, or fire.
Do not put fingers into fans; supervise children. Ensure safety during operation.
Entrust dealers or qualified persons for moving or repairing the heat pump to avoid hazards.
Drain water if unit is unused below 0°C. Stop unit and power off for cleaning.
Appliance use by children and persons with reduced capabilities requires supervision and understanding of hazards.
Proper disposal of electrical appliances to prevent environmental contamination and health risks.
Overview of the air source heat pump water heater as an eco-friendly and energy-saving appliance.
Explanation of the heat pump's operation using heat transfer medium to heat water.
Visual representation and description of the heat pump unit's design.
Detailed measurements and size specifications for the E300WHF model.
Comprehensive data on the unit's performance, including heating capacity, input power, and noise levels.
Guidelines for choosing the optimal location to install the heat pump unit, considering environmental factors.
Key considerations and precautions during the installation process for safety and performance.
Instructions for connecting water pipes and air ducts, including diagrams and material recommendations.
Diagrams and guidelines for the electrical wiring and connections of the unit.
Detailed electrical diagram showing internal components and connections.
Specific requirements and considerations for installing the unit in an outdoor environment.
Step-by-step guide for initial water injection and drainage operations.
How to use the control panel to manage unit functions and settings.
Explanation of the control panel's interface, buttons, and operating modes.
Detailed instructions for setting temperature, modes, and other parameters via the control panel.
Configuration of various timing functions, including basic, weekly, and special date settings.
Procedures for cancelling or resetting programmed timer settings.
Setting up recurring daily or weekly operational schedules for the unit.
Instructions for setting special date-based timers and configuring holiday operation modes.
Details on vacation setting cancellation, priority, and sterilization functions (manual/automatic).
How to check parameters, recover factory defaults, and perform manual defrosting.
Information on the safety lock function and how to check the water tank bottom temperature.
Lists common malfunctions, codes, failure performance, and methods for automatic or manual recovery.
Guidelines for regular cleaning, component usage, and power supply checks for efficient operation.
Answers to common queries on temperature issues, control panel blank screen, valve leaks, and anode replacement.
Details on the specific fuse model required for replacement.
General| Model | E300WHF |
|---|---|
| Category | Water Heater |
| Brand | EAS Electric |
| Type | Electric |
| Wattage | 3000 W |
| Warranty | 5 years |
| Voltage | 220-240 V |
To Next Page
