EAS Electric ECRL10B - How to Use Basic Functions

How to Use Basic Functions
ATTENTION! Before operation,
please ensure the unit is plugged in
and power is available.
AUTO Mode
SETTING TEMPERATURE
The operating temperature range for
units is 16-30°C (60-86°F) / 20-28ºC
(68-82ºF). You can increase or decrease
the set temperature in 1°C (1°F) incre-
ments.
In AUTO mode, the unit will automatically
select the COOL, FAN or HEAT operation
based on the set temperature.
1. Press the MODE button to select AUTO.
2.
3.
Set your desired temperature using the
TEMP or TEMP button.
Press the ON/OFF button to start the
unit.
NOTE: FAN SPEED can’t be set in AUTO
mode.
COOL Mode
Basic operation
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature
using the TEMP or TEMP
button.
3. Press FAN button to select the
fan speed in a range of AU-100%.
4. Press the ON/OFF button to start
the unit.
1
3
2
1
3
2
4
7
V.1