INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Easco Boiler Corp 1175 Leggett Ave Bronx, NY 1047 T: 718.378.3000 F: 718.378.4560 info@easco.com easco.com
Page 14 of 46
SECTION 4: INSTALLATION INSTRUCTIONS
4.1 Inspection of Equipment Shipment
4.1.1 Equipment is carefully manufactured, inspected and packaged, for delivery to
Purchaser/Consignee via an independent transportation carrier/agent.
4.1.2 Carefully inspect and check the Equipment together with containers, pallets,
boxes and/or crates for any signs of external and internal damage, general abuse or
shortages, immediately upon receipt.
4.1.3 Protective enclosures including Equipment wrap, containers, pallets, boxes and/
or crates, together with component part cover plates, enclosures, guards, service access
ports, doors, service connections and discharges may require temporary removal,
opening and/or general access to perform such inspections, as necessary, to assure
Equipment integrity upon receipt. Immediately secure any and all wrap, containers,
pallets, boxes and/or crates and replace any and all cover plates, enclosures, guards,
service access ports, doors, service connections and discharges protective devices,
once inspected, until ready for final placement and installation.
4.1.4 Purchaser/Consignee must note any and all signs of external and internal damage,
general abuse or shortages on the Bill of Lading Receipt, provided for signature, by the
transportation carrier/agent of this eat time of delivery, regardless of any dispute, which
may ensue with transportation carrier/agent, regarding Equipment condition or shortage.
4.1.5 Equipment is shipped Freight on Board (FOB). This indicates EASCO’s responsibility
for providing Equipment, as indicated on Bill of Lading and/or Delivery Receipt, in good
condition, free of external and internal damage, general abuse or shortage, ceases with
the transportation carrier/agent receipt of Equipment at the factory.
4.1.6 Should any external and internal damage, general abuse or shortage is noted and
subsequent claim for replacement or repair is sought, it is the Purchaser/Consignee
responsibility to make such claim directly against transportation carrier/agent. Any
and all replacement or repair authorizations by Purchaser/Consignee to EASCO shall
be done so as an added cost. These costs may be applied to any claim against the
transportation carrier/agent, which the Purchaser/Consignee may institute.
4.1.7 The Purchaser/Consignee must file claims, for any external and internal
damage, general abuse or shortage, within seven (7) days upon receipt, against the
transportation carrier/agent.
4.1.8 Claims for variances from Purchase will not be allowed by EASCO unless
presented in writing within thirty (30) days after receipt of Equipment.
4.1.9 Freight costs are categorized as Full Freight Allowed (FFA) indicating freight
costs are borne by EASCO, Collect (COL) whereby the Purchaser/Consignee shall pay
transportation carrier/agent at time of receipt, or Pre-Paid and Charge (PPC) indicating
To Next Page