Need help?Do you have a question about the East Tester ET432 and is the answer not in the manual?
General| Duty Cycle | 0.1%~99.9% |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Operating Environment | 0°C to 40°C, <80% RH |
| DC Current | 10A |
| AC Current | 10A |
| Capacitance | 100μF |
| Frequency | 10MHz |
| Display | 6000 counts |
| Measurement Range | Auto/Manual |
| Test Current | 1mA |
| Accuracy | ±(0.5%+3) |
| Weight | 350g |
| Dimensions | 190 x 90 x 45 mm |
Essential guidelines for safe operation and use of the instrument.
Details the physical controls and layout of the instrument's front panel.
Covers the measurement and system settings interfaces displayed on the instrument.
Instructions for powering the instrument on and off correctly.
Procedures for open and short circuit correction to improve accuracy.
Overview of general specifications and parameters for the ET43 series.
Details on the accuracy specifications and formulas for measurements.
Provides notes and specific accuracy indicators for different models and conditions.
Procedures for troubleshooting and basic maintenance of the instrument.
To Next Page
