EASTONTECH EW Series

To Next Page

To Previous Page

EW-ECO SERIES OPERATION MANUAL

a reset action; in the working state, press this button, the

machine to shut down, after the implementation of the reset

action;

：In a data input state press this key, enter the number 0; in the

standby state press this button, the machine will enter the

stripping parameter setup state;

：In a data input state press this key, enter the number 1; in the

standby state press this button, the machine will enter the speed

parameter setup state;

：In a data input state press this key, enter the number 2; in the

standby state press this button, the machine will enter the

twisting parameter setup state;

：In a data input state press this key, enter the number 3; in the

standby state press this button, the machine will according to the

current function into setting picture corresponding to the

function;

：In a data input state press this key, enter the number 4; in the

standby state press this button, volume 0;

：In a data input state press this key, enter the number 5; in the

EASTONTECH EW Series - Page 8