Need help?Do you have a question about the Easycar E8-B and is the answer not in the manual?
Explains connections for various vehicle circuits and components.
Details Negative, Positive, Reverse Polarity, and Vacuum door lock system wiring.
Describes Negative and Positive one-way door lock system wiring.
Details outputs like Trunk Release, Siren, Key Trigger, Parking Light, Status/Bypass, Ground.
Details Tachometer, Parking Light, Foot Brake, Door Trigger, Parking Brake/Neutral Safety, System Turn On, Diesel Wait to Start, Trunk Trigger inputs.
Describes 4-digit passcode entry to lock/unlock vehicle.
Explains the 10-digit blue LED functions (arming, disarming, valet, emergency).
Guide for central installation and adjusting sensitivity for shock detection.
Recommends horizontal mounting on the windshield for optimal range.
Details engine start/stop and accessory modes via the push button.
Explains Aux 1, Aux 2, Starter Kill, and Auto Light Control outputs.
Details mounting the LF module and its smart door unlock/lock function.
Details mounting advice and the sensor's role in monitoring interior temperature.
Explains jumper wire use for manual vs. automatic transmissions.
Details dip switch settings for noise or alternator sensing.
Explains the LED indicating engine running status.
Step-by-step guide to program remote controls to the system.
Procedure to set a 4-digit passcode for the Easy Door Lock.
Process for registering remotes with the Smart Door lock function.
Explains how to interpret parking light flashes for no-start errors.
Steps to select and program specific options using button presses.
How to recognize and correct programming errors.
Instructions to restore the system to its default factory settings.
Details the warranty coverage, exclusions, and claim process.
To Next Page
General