1. Product description
2. General information
3. Safety instructions
4. Installation situation
5. Installation, mechanics
6. Installation, electrical
system
7. Commissioning/operation
8. Notes/warnings
Appendix
A1 Synchronisation
A2 Maintenance
A3 Comments and
recommendations
A4 FAQ
A5 Warranty regulations
A6 Declaration of conformity
List of images
Delivery scope
Remote control
Motor drive
- Assembly
+ Installation dimension
Connection plan
The name "easydriver" is used in these instructions
instead of "easydriver basic" to increase simplicity and
clarity.
The easydriver is part of the technical product range of
Reich GmbH. The design of the manoeuvring drive was
based on practical experience and was undertaken with
great diligence.
easydriver is permanently attached to a caravan or
trailer. Only the right and the left
drive unit are coupled to the tyres for marshalling pur-
poses. They are decoupled from the tyres after ma-
noeuvring.
The caravan or trailer is powered by two 12V electrical
motors. The remote control provided facilitates conven-
ient and safe manoeuvring. Symbols on the remote
control indicate the respective driving direction.
GB1
English
1. Product description Index
To Next Page
Loading...
