3. Remote engine start: In arm status, keep pressing
the start button for around 5 seconds.
1. Lock/Arm: press lock button once
2. Unlock/disarm: press unlock button once
4. Remote engine cut off: keep pressing the start
button for around 5 seconds.
5. Panic: short press start button once
6. Remote trunk release: keep pressing the trunk
button for 5 seconds
7. Spare key( default is without, and we recommend
you to equip one for future emergency usage)
LED indicator
Arm
Disarm
Disarm/trunk release
Start button/panic
Spare Key
Spare Key
LED indicator
Arm
Start button/Panic
Disarm/trunk release
1. Lock/Arm: press lock button once
2. Unlock/disarm: press unlock button once
4. Remote engine cut off: keep pressing the start
button for around 5 seconds.
5. Panic: short press start button once
6. Remote trunk release: keep pressing the trunk
button for 5 seconds
7. Spare key( default is without, and we recommend
you to equip one for future emergency usage)
3. Remote engine start: In arm status, keep pressing
the start button for around 5 seconds.
Function description:
1.Arm/lock
B.When PKE function is turn off: Short pressing lock button on key fob once will lock the car
door. When this happens, turn signal light flashes once and siren beeps once.
A.When PKE function is turned on: Short pressing lock button once on key fob will lock the car door. At
the same time, turn signal light flashes once and siren beeps once. When doing this, please make sure
you are not in PKE induction range (should be at least 5 meters/15 feet away from the car) or will trigger
the PKE fenction and cause the door automatically unlock again.
Short press unlock button once will unlock the car door.
A.When PKE function is turn on: Short pressing unlck button on key fob once will unlock the car door.
At the same time, the turn signal light flashes twice & siren beeps twice (siren not beep if the device is in
mute arm status). When doing this, please make sure you are not in PKE induction range (should be at
least 5 meters/15 feet away from the car) or the alarm will automatically unlock the car door if in the PKE
induction range.
2.Disarm/unlock
When you are out of PKE induction range (5 meters / 15 feet away from the car) and press unlock button
once to unlock the car door, you only have 3 seconds to get in the car as the device will automatically
lock after 3 seconds.
C.You have 3 seconds to get in the car if manual unlock the car door when you are out of PKE induction
range and the door will be automatically lock again after 3 seconds.
B.When PKE function is turn off: Short press unlock button once will unlock the car door. At the same
time, turn signal light flashes twice and siren beeps twice.
3.Mute alarm turn on/off setting
Under disarm/unlock status, hold lock button & start button at the same time for around 5 seconds,
siren beeps twice means the device is exited mute arm status.
Under arm/lock status, hold lock button & start button at the same time for around 5 seconds, siren
beeps once means the device is set into mute arm status. Once the device is set into mute arm status,
when locking or unlock the device, siren not beep.
Keep pressing unlock button for 5 seconds on key fob will remote release car trunk & siren beeps once
to confirm.
Please make sure there is trunk motor or trunk release solenoid kit in your vehicle when operate this
function.
4.Remote trunk release
While armed, press panic button once, siren beeps and turn signal light flash for 25 seconds at the same
time to indicate the vehicle location. press any button on key fob to pause the panic mode.
5.Panic mode
Shutoff the vehicle, close all the doors well and walk away from the car for 2-3 meters/6-9 feet away with
the key fobs, the device will lock the door & arm automatically. At the same time, the siren beeps once
and turn signal light flashes once.
Note:
When key fob is in PKE induction range, the led indicator on the key fob will blink slowly. You can use
this info to judge whether the key fob is in or out of PKE induction range.
6. PKE-passive keyless entry
When you approach the vehicle in 1-2 meters / 3-6 feet with key fob, the vehicle will automatically unlock
car door, turn signal light flashes twice & siren beeps twice at the same time.
Disarm/unlock the car, keep holding lock button on key fob for 5 seconds, siren beeps twice means
disable/turn off the PKE feature and siren beeps once means enable/turn on the PKE feature.
7.To enable or disable PKE feature
The PKE feature default is turn on/enable. You can disable it with below instructions:
To use remote engine start function, the gear selector should be in N(Neutral) or P(parking) position. To
use remote engine start/stop feature, the device should be in arm/lock status. It's recommended that you
keep at least 5 meters/15 feet away from your vehicle as you can't use remote engine start function
when in PKE induction range.
8. Remote engine start/stop
-12-
© EASYGUARD Electronics. All right reserved.
-11-
© EASYGUARD Electronics. All right reserved.
To Next Page
Loading...