EasyLog EL-SIE-1+ - User Manual

To Next Page

EL-SIE-1+

High Accuracy Temperature USB Data Logger,

ĂƐǇ>ŽŐůŽƵĚŽŵƉĂƟďůĞ

DŽŶŝƚŽƌƚŚĞĞŶǀŝƌŽŶŵĞŶƚǇŽƵůŝǀĞĂŶĚǁŽƌŬŝŶǁŝƚŚƚŚĞĂƐǇ>ŽŐ>Ͳ^/ͲϭнŽŶĮŐƵƌĂƟŽŶŝƐƐŝŵƉůĞǁŝƚŚŶŽƐŽŌǁĂƌĞƚŽŝŶƐƚĂůů

ŽŶǇŽƵƌWŽƌDĂĐʹũƵƐƚĐŽŶŶĞĐƚƚŚĞůŽŐŐĞƌǁŝƚŚĂh^ĐĂďůĞĂŶĚƵƐĞǇŽƵƌƐƚĂŶĚĂƌĚǁĞďďƌŽǁƐĞƌƚŽĐŽŶĮŐƵƌĞƚŚĞĚĞǀŝĐĞĨŽƌ

ůŽŐŐŝŶŐzŽƵĚŽŶƚĞǀĞŶŶĞĞĚŝŶƚĞƌŶĞƚĂĐĐĞƐƐƚŽƐĞƚƵƉĂŶĚƵƐĞƚŚĞ>Ͳ^/ͲϭнŝƚƌĞĂůůǇĐŽƵůĚŶƚďĞĞĂƐŝĞƌ

dŚĞůŽŐŐŝŶŐŝŶƚĞƌǀĂůĐĂŶďĞƐĞƚďĞƚǁĞĞŶϭϬƐĞĐŽŶĚƐĂŶĚϮϰŚŽƵƌƐǁŝƚŚŝŵŵĞĚŝĂƚĞĚĞůĂǇĞĚƚƌŝŐŐĞƌĞĚŽƌƉƵƐŚͲƚŽͲƐƚĂƌƚůŽŐŐŝŶŐ

ůĂƌŵƐĂƌĞĨƵůůǇƵƐĞƌĐŽŶĮŐƵƌĂďůĞǁŝƚŚĨƵŶĐƟŽŶĂůŝƚǇŝŶĐůƵĚŝŶŐĐƵŵƵůĂƟǀĞĂůĂƌŵƐƉƌĞͲĂůĂƌŵƐĂĚĞůĂǇďĞĨŽƌĞĂůĂƌŵƚƌŝŐŐĞƌŝŶŐ

ĂŶĚĂŶĂůĂƌŵŚŽůĚŽƉƟŽŶǁŚŝĐŚĐŽŶƟŶƵĞƐƐŚŽǁŝŶŐƚŚĞĂůĂƌŵĐŽŶĚŝƟŽŶĞǀĞŶŝĨƚŚĞƌĞĂĚŝŶŐƌĞƚƵƌŶƐƚŽĂŶĂĐĐĞƉƚĂďůĞůĞǀĞů

dŚĞĚŝƐƉůĂǇƐŚŽǁƐĐƵƌƌĞŶƚŵĂǆŝŵƵŵĂŶĚŵŝŶŝŵƵŵƌĞĂĚŝŶŐƐĂŶĚƚŚƌĞĞĐŽůŽƵƌĞĚ>ƐŝŶĚŝĐĂƚĞĚĞǀŝĐĞƐƚĂƚƵƐĂƚĂŐůĂŶĐĞ

KŶĐĞůŽŐŐŝŶŐŝƐĐŽŵƉůĞƚĞƌĞͲĐŽŶŶĞĐƚƚŽǇŽƵƌĐŽŵƉƵƚĞƌĂŶĚƵƐĞǇŽƵƌďƌŽǁƐĞƌƚŽǀŝĞǁĂŶĂůǇƐĞĂŶĚƐĂǀĞǇŽƵƌĚĂƚĂzŽƵĐĂŶĂůƐŽ

ĐŚŽŽƐĞƚŽƵƉůŽĂĚǇŽƵƌĚĂƚĂƚŽĂŶĂƐǇ>ŽŐůŽƵĚĂĐĐŽƵŶƚŵĂŬŝŶŐƚŚĞĚĂƚĂĂĐĐĞƐƐŝďůĞŽŶůŝŶĞĨŽƌƉŽǁĞƌĨƵůŐƌĂƉŚŝŶŐĂŶĂůǇƐŝƐĂŶĚ

ƌĞƉŽƌƚŐĞŶĞƌĂƟŽŶ

dǇƉŝĐĂůďĂƩĞƌǇůŝĨĞŝƐŽǀĞƌϭǇĞĂƌƵƐŝŶŐƐƚĂŶĚĂƌĚĂůŬĂůŝŶĞďĂƩĞƌŝĞƐĂŶĚĂǁĂůůŵŽƵŶƟŶŐďƌĂĐŬĞƚŝƐƐƵƉƉůŝĞĚǁŝƚŚƚŚĞĚĞǀŝĐĞ

ͻ ͲϭϴƚŽнϱϱΣ;ͲϬϰƚŽнϭϯϭΣ&ͿƚĞŵƉĞƌĂƚƵƌĞŵĞĂƐƵƌĞŵĞŶƚƌĂŶŐĞ

ͻ ^ƚŽƌĞƐŽǀĞƌϭϬϬϬϬϬϬƌĞĂĚŝŶŐƐ;ƐƉĞƌƐƉĞĐƚĂďůĞͿ

ͻ EŽƐŽŌǁĂƌĞƚŽŝŶƐƚĂůůͲĐŽŶĮŐƵƌĞƵƐŝŶŐǇŽƵƌŶŽƌŵĂůǁĞďďƌŽǁƐĞƌ

• Use with a PC or Mac

ͻ ŝƐƉůĂǇƐŚŽǁƐĐƵƌƌĞŶƚŵĂǆŝŵƵŵĂŶĚŵŝŶŝŵƵŵƌĞĂĚŝŶŐƐ

• Status and alarm indicators

• On-board alarm sounder

ͻ ĂƚĂĐĂŶďĞƵƉůŽĂĚĞĚƚŽƚŚĞĂƐǇ>ŽŐůŽƵĚ

dĞŵƉĞƌĂƚƵƌĞ Measurement range -18 to +55°C (-0.4 to +131°F)

ZĞƐŽůƵƟŽŶ 0.01°

Accuracy цϬϭΣ;цϬϭϴΣ&ͿƚǇƉŝĐĂů

Long term stability <0.03°C (<0.054°F) / year

Measurement units ΣΣ&Žƌ<

Logging rate ϭϬƐĞĐŽŶĚƐƚŽϮϰŚŽƵƌƐƵƐĞƌƐĞůĞĐƚĂďůĞ

Start modes /ŵŵĞĚŝĂƚĞƉƵƐŚƚŽƐƚĂƌƚĚĞůĂǇĞĚƐƚĂƌƚ

ƉĂƌĂŵĞƚĞƌƚƌŝŐŐĞƌĞĚ

DĞŵŽƌǇĐĂƉĂĐŝƚǇ KǀĞƌϭϬϬϬϬϬϬƚŽƚĂůƌĞĂĚŝŶŐƐ

Sounder Integrated alarm sounder

Power source ϮǆϭϱsďĂƩĞƌǇ

ĂƩĞƌǇůŝĨĞ >1 year (at 25°C with 10 minute logging rate)

ŝŵĞŶƐŝŽŶƐ ϵϯǆϰϮǆϭϳŵŵ;ĞǆĐůƵĚŝŶŐďƌĂĐŬĞƚͿ

KƉĞƌĂƟŶŐƚĞŵƉĞƌĂƚƵƌĞƌĂŶŐĞ -18 to +55°C (-0.4 to +131°F)

ŶǀŝƌŽŶŵĞŶƚĂůƌĂƟŶŐ IP4X

SPECIFICATIONS

>/Zd/KEZd/&/d^s/>>

>ĂƐĐĂƌŽīĞƌƐĂdƌĂĐĞĂďůĞĂůŝďƌĂƟŽŶĞƌƟĮĐĂƚĞ^ĞƌǀŝĐĞŽŶdĞŵƉĞƌĂƚƵƌĞĂƚĂ>ŽŐŐĞƌƐhƐŝŶŐƌĞĨĞƌĞŶĐĞĞƋƵŝƉŵĞŶƚ

ǁŚŝĐŚŚĂƐďĞĞŶĐĂůŝďƌĂƚĞĚďǇĂh<^E/^dE^ĂĐĐƌĞĚŝƚĞĚůĂďŽƌĂƚŽƌǇĂŶĚƵƐŝŶŐĂƉƉĂƌĂƚƵƐƚƌĂĐĞĂďůĞƚŽŶĂƟŽŶĂůŽƌ

ŝŶƚĞƌŶĂƟŽŶĂůƐƚĂŶĚĂƌĚƐ&ŽƌŵŽƌĞŝŶĨŽƌŵĂƟŽŶƉůĞĂƐĞƐĞĞwww.lascarelectronics.com.

ACCESSORIES

BAT 1V5 AAA ϮǆϭϱsĂůŬĂůŝŶĞ

ďĂƩĞƌŝĞƐ

CABLE USB 3.1 C 0.5M USB A to USB C Cable

/E>h/Ed,Ky

BAT 1V5 AAA ϮǆϭϱsĂůŬĂůŝŶĞ

ďĂƩĞƌŝĞƐ

EL-SIE WALL BRACKET DŽƵŶƟŶŐďƌĂĐŬĞƚ

CABLE USB 3.1 C 0.5M USB A to USB C Cable

Need help?

Do you have a question about the EasyLog EL-SIE-1+ and is the answer not in the manual?

The EL-SIE-1+ is a high-accuracy temperature USB data logger designed for EasyLog Cloud compatibility. This device allows users to monitor and record temperature data with precision, offering a robust solution for various applications.

Function Description

The EL-SIE-1+ functions as a standalone temperature data logger that can store over 1,000,000 readings. It connects to a PC or Mac via a USB cable for setup, data download, and analysis. The device is designed to be user-friendly, with no software installation required; the configuration interface is accessed through a web browser. Once configured, the logger operates independently, recording temperature data at specified intervals.

A key feature is its compatibility with the EasyLog Cloud. This allows users to upload recorded data to the cloud for secure storage, remote access, and advanced analysis. The cloud platform provides tools for graphing, data comparison, and more, enhancing the utility of the logger beyond local data management.

The device includes a display that shows current, maximum, and minimum readings, as well as alarm and logger status. It also features an audible alarm and LED indicators to alert users to specific conditions, such as temperature excursions or low battery. The Push to Start button allows for easy initiation of logging, while the Stop/Menu button provides access to various settings and functions.

Important Technical Specifications

Measurement Range: -18 to +55°C (-0.4 to +131°F)
Resolution: 0.01°
Accuracy: ±0.1°C (±0.18°F) typical
Long Term Stability: ±0.03°C (±0.054°F) / year
Measurement Units: °C, °F or K
Logging Rate: 10 seconds to 24 hours, user selectable
Memory Capacity: Over 1,000,000 total readings
Power Source: 2 x AAA 1.5V battery
Battery Life: >1 year (at 25°C with 10 minute logging rate)
Dimensions: 93 x 42 x 17 mm (excluding bracket)
Operating Temperature Range: -18 to +55°C (-0.4 to +131°F)
Environmental Rating: IPX4
USB Cable: USB 3.1 C to C, USB 3.1 C to A
Accessories: Wall bracket, 2 x AAA 1.5V alkaline batteries

Usage Features

The EL-SIE-1+ is designed for ease of use from setup to data analysis.

No Software to Install: The device presents itself as a mass storage device when connected to a computer. Configuration and data viewing are done through a web browser, eliminating the need for proprietary software installation. This makes it highly portable and usable across different operating systems (PC or Mac).
Flexible Configuration: Users can customize logging rates, alarm thresholds (high/low/pre-alarm/cumulative), and start/stop modes. The device supports immediate, delayed, triggered, or push-to-start logging, offering flexibility for various monitoring scenarios.
Display and LED Indicators: The integrated display provides real-time information, including current readings, min/max values, and logger status (e.g., logging, alarm, battery level). Three LEDs (green, yellow, red) provide visual cues for active logging, warnings, and alarms.
Audible Alarm: An audible alarm can be configured to sound when temperature thresholds are exceeded, providing immediate notification of critical events.
EasyLog Cloud Integration: Data can be seamlessly uploaded to the EasyLog Cloud for secure storage, remote access, and advanced analysis. The cloud platform offers graphing tools, data comparison, and the ability to share data with others. This enhances data management and accessibility, especially for multi-site monitoring.
Event Recording: The device records various events, such as push to start, triggered start, delayed start, current reading, min reading, max reading, and stop logging. This provides a comprehensive audit trail of the logger's operation.
Button Functions: The device features two buttons: "Push to Start" and "Stop/Menu." The "Push to Start" button initiates logging, while the "Stop/Menu" button can stop logging, clear alarms, show min/max readings, mute alarms, and access other menu functions depending on the context and duration of the press.
Display Status Indication: The LCD provides detailed status information, including USB connection, logger status (e.g., USB Connected, Logger Running, Alarm Triggered, Cumulative Alarm, Triggered Start, High Alarm, Low Alarm, Held High Alarm, Held Low Alarm, Memory Full, Memory 90%, Calibration Pending, Calibration Expired), and battery level.

Maintenance Features

The EL-SIE-1+ is designed for minimal maintenance, focusing on battery replacement and calibration.

Battery Replacement: The device is powered by two AAA 1.5V alkaline batteries, which typically last over a year at a 10-minute logging rate. The logger will continue to log critical data even when batteries are discharged or replaced, provided it is connected to a computer via USB. This ensures data integrity during battery changes.
Calibration: Lascar offers a Traceable Calibration Certificate Service on Temperature Data Loggers. Using reference equipment which has been calibrated by a UKAS/NIST/CNAS accredited laboratory and using apparatus traceable to national or international standards, Lascar ensures the accuracy of the device. The display indicates "Calibration Pending" or "Calibration Expired" when the calibration due date is approaching or has passed, prompting users to arrange for recalibration.
Data Integrity: The logger stores its data in non-volatile memory, meaning data is retained even if the batteries are discharged or removed. This ensures that valuable temperature records are not lost.
Firmware Updates: While not explicitly detailed as a user-accessible feature, firmware updates could potentially be managed through the web interface, ensuring the device remains up-to-date with the latest functionalities and improvements.