Connecting to a computer
By connecting the camera to a computer, you can transfer
the images directly to the computer, charge the camera or
use it as a webcam.
Connect the USB-C port of the camera and the USB port of
the computer using the USB cable supplied. The camera
switches on automatically and the screen shows the
available options.
Press the up/down button to select the desired option and
then press the OK button to confirm the option.
Charge battery
If you select neither mass storage nor PC camera, the
camera is automatically charged only.
Mass storage
Select "Mass storage" to recognise the camera as a drive on
the computer and transfer data.
Note: Data can only be copied from the memory card to
the computer.
PC camera
The camera can be used as a webcam.
To Next Page
Loading...
