Need help?Do you have a question about the EAT C-Major and is the answer not in the manual?
Remove the three transport screws before installing components for safe shipping and transport.
Install the sub-platter and drive belt onto the turntable as shown in the illustrations.
Install the main platter onto the sub-platter.
Detailed steps for assembling the tonearm, including cartridge, counterweight, VTF, VTA, azimuth, and anti-skating.
Use the damped adjustable feet and a spirit level to ensure the turntable is perfectly level.
Instructions for using the record clamp, starting the motor, and changing playback speeds (33/45 RPM).
To Next Page
General
