Need help?Do you have a question about the EAT Prelude and is the answer not in the manual?
Procedure for installing the motor base and connecting its cable to the turntable.
Instructions for installing the platter and drive belt onto the turntable.
Detailed steps for assembling and setting up the tonearm components.
Guide for installing a cartridge into the tonearm headshell.
Procedure for installing the counterweight and setting Vertical Tracking Force (VTF).
Instructions for connecting the tonearm cable to the turntable's output.
Steps to correctly set the Vertical Tracking Angle (VTA) of the tonearm.
Guidance on adjusting the tonearm's azimuth for correct playback.
Procedure for assembling and adjusting the anti-skating mechanism.
Instructions for ensuring the turntable is properly leveled.
Guide on operating the motor and switching between playback speeds.
Solutions for common operational problems like platter not turning or no signal.
Information on how to get assistance or service for the turntable.
Details regarding the product's warranty and manufacturer liability.
General| Output | RCA |
|---|---|
| Speed | 33/45rpm (manual change) |
| Power Supply | External power supply |
| Power consumption | 5W |
| Drive System | Belt drive |
To Next Page
