EAT Prelude User Manual

12
of the wire support (7).
The anti-skating force must be adjusted corresponding to the downforce as follows:
Downforce
Groove in the stub (8)
10 - 14mN 1
st
from bearing rings
15 - 19mN 2
nd
" " "
20mN and bigger 3
rd
" " "
Be careful when handing the anti-skating thread in order to avoid damaging it
4. Leveling the turntable
Three precision adjustable damped feet are mounted under the turntable for leveling the
turntable. Once the turntable is in final position, put the spirit level on the sub-chassis, and
then level the turntable by screwing or unscrewing the feet as needed. It is advisable to check
level from several positions on the chassis.
8
!

EAT Prelude Specifications

General

Brand	EAT
Model	Prelude
Category	Turntable
Language	English