To Next PageTo Next Page
Need help?Do you have a question about the Eaton CHSPT2MICRO and is the answer not in the manual?
Details on how to mount the CHSP device, including loadcenter, surface, and flush mounting options.
Essential pre-installation checks and requirements, including grounding and code compliance.
Instructions for installing the dedicated 2-pole circuit breaker for the CHSP device.
Guidance for installing the CHSP device indoors, covering panel and surface mounting.
Specific steps for mounting the CHSP device within an electrical panel using knockouts.
Instructions for surface mounting the CHSP device using self-tapping screws.
Steps for flush mounting the CHSP device on a finished wall using an optional lid.
Guidelines for outdoor installation, emphasizing raintight fittings and conduit use.
Detailed instructions for wiring the CHSP device to the electrical system, including wire stripping and connections.
Procedure for applying power, checking LED indicators, and verifying system operation.
Explanation of normal operation and how the LED indicator signifies protection status.
Details on how to mount the CHSP device, including loadcenter, surface, and flush mounting options.
Essential pre-installation checks and requirements, including grounding and code compliance.
Instructions for installing the dedicated 2-pole circuit breaker for the CHSP device.
Guidance for installing the CHSP device indoors, covering panel and surface mounting.
Specific steps for mounting the CHSP device within an electrical panel using knockouts.
Instructions for surface mounting the CHSP device using self-tapping screws.
Steps for flush mounting the CHSP device on a finished wall using an optional lid.
Guidelines for outdoor installation, emphasizing raintight fittings and conduit use.
Detailed instructions for wiring the CHSP device to the electrical system, including wire stripping and connections.
Procedure for applying power, checking LED indicators, and verifying system operation.
Explanation of normal operation and how the LED indicator signifies protection status.
General| Voltage Rating | 120/240 VAC |
|---|---|
| Maximum Continuous Operating Voltage (MCOV) | 150V |
| Maximum Discharge Current (Imax) | 40kA |
| Maximum Surge Current | 40kA |
| Number of Poles | 2 |
| Mounting Type | DIN Rail |
| Application | Residential and light commercial |
| LED Status Indicators | Yes |
| Response Time | < 1 ns |
| Enclosure Rating | NEMA 1 |
| Standards | UL 1449 3rd Edition |
| Type | Surge Protective Device |
| Surge Protection Type | Type 2 |
| Protection Modes | L-N, N-G |
| Operating Temperature | -40°C to 70°C |
| Wire Size | 14-4 AWG |
