Eaton Crouse-Hinds MTL F300 Series - Table of Contents

iiiINM F300 rev 7
CONTENTS
DECLARATION OF CONFORMITY ......................................................II
GENERAL SAFETY INFORMATION ....................................................IV
1 OVERVIEW ........................................................................1
2 DESCRIPTION ......................................................................1
3 COMPONENTS AND ACCESSORIES ...................................................2
4 MECHANICAL ......................................................................2
4.1 Mounting orientation .....................................................................2
4.2 Enclosure requirements ...................................................................2
4.3 DIN-rail mounting ........................................................................3
4.4 Removal from DIN-rail ....................................................................3
5 ELECTRICAL CONNECTIONS .........................................................3
5.1 DC Power Requirements ..................................................................4
5.2 Terminator ..............................................................................4
5.3 Trunk connections .......................................................................4
5.4 Spur port connections ....................................................................5
5.5 Cable screen connections .................................................................5
5.6 Surge protection .........................................................................5
6 TESTING ..........................................................................6
6.1 Power LED ..............................................................................6
6.2 Spur LEDs ..............................................................................6
7 ROUTINE MAINTENANCE ............................................................6
8 ATEX SAFETY INSTRUCTIONS ........................................................7
8.1 General ................................................................................7
8.2 Installation ..............................................................................7
8.3 Inspection and maintenance ...............................................................7
8.4 Repair .................................................................................7
8.5 Marking ................................................................................8
9 FM CONTROL DRAWINGS ...........................................................9
10 IECEx SAFETY INSTRUCTIONS ......................................................12
10.1 SPECIFIC CONDITIONS OF USE ...........................................................12
10.2 IECEx Control drawings ...............................................................13-16