IB02602004E For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008 Page 23
Instructions for the FP-6000 Protective Relay
4 Front Panel Operation
4.1 Description
The FP-6000 front panel is the local operator interface that provides a means to monitor, program and test the relay. It consists of a
4-line by 20-character vacuum fluorescent display, 6 display mode pushbuttons with integral LEDs, 9 status LEDs, 6 pushbuttons for
display menu navigation, a Reset pushbutton, 2 pushbuttons for breaker control, DB-9 communication port, and a battery for trip
indication. Each of these will be identified and described in the following sections.
Figure 8. Panel.
FP-6000
Operational
and
Breaker
Status
Display
Navigation
Buttons
Single
Arrow
Buttons/
Security
Door
Setting/
Test
Reset Mode
Button
4 line X 20
Character
Display
Display
Mode
Buttons
Programmable
LEDs
Front RS-232
Port DB9
Battery
Backup for
Trip Indicators
Breaker
Control
Buttons
To Next Page
Loading...
