Eaton FM-14E310B-LAS User Manual

Service Manual
UltraSh
ift PLUS
Automated Transmissions
TRSM0940 EN-US
October 2022
Linehaul Active Shifting (LAS)
Vocational Active Shifting (VAS)
Multipurpose Extreme Performance (MXP)
Multipurpose High Performance (MHP)
Vocational Construction Series (VCS)
Vocational High Performance (VHP)
Vocational Multipurpose Series (VMS)
Vocational Extreme Performance (VXP)

Eaton FM-14E310B-LAS Specifications

General

Brand	Eaton
Model	FM-14E310B-LAS
Category	Microphone system
Language	English

Summary

General Information

Warnings & Cautions

General safety warnings for operation and maintenance.

Auxiliary Section Service Procedures

LAS/VAS Auxiliary Section Removal and Disassembly – In Chassis

Covers removal and disassembly of the Auxiliary section while the transmission is in the chassis.

LAS/VAS Auxiliary Section Removal and Disassembly

Lists special tools and identifies components for LAS/VAS auxiliary section removal and disassembly.

LAS/VAS Auxiliary Counter Shaft Installation and Timing

Details the procedure for installing and timing auxiliary counter shafts.

VCS/VMS Auxiliary Section Removal and Disassembly – In Chassis

Covers removal and disassembly of the VCS/VMS Auxiliary Section while the transmission is in the chassis.

VCS/VMS Auxiliary Section Removal and Disassembly

Lists special tools for VCS/VMS auxiliary section removal and disassembly.

VCS/VMS Auxiliary Counter Shaft Assembly and Timing

Procedure for timing auxiliary counter shafts for VCS/VMS.

MHP/MXP/VHP/VXP Auxiliary Section Removal and Disassembly

MHP/MXP/VHP/VXP Auxiliary Countershaft Installation

Procedure for installing and timing auxiliary counter shafts for MHP/MXP/VHP/VXP.

MHP/MXP/VHP/VXP Auxiliary Countershaft Shimming

Instructions for shimming auxiliary counter shafts for MHP/MXP/VHP/VXP.

Removal and Installation

Electronic Clutch Actuator (ECA)

Transmission Electronic Control Unit (TECU)

Details special tools and component identification for the TECU.

Disassembly and Assembly

Main Case Main Shaft without Low Force Gearing Disassembly

Steps for disassembling the main case main shaft without low force gearing.

Main Case Main Shaft with Low Force Gearing Disassembly

Component identification for main case main shaft disassembly with low force gearing.