174
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
VCS/VMS Combination Cylinder | Disassembly and Assembly TRSM0940
VCS/VMS Combination Cylinder Disassembly
1. On the Combination Cover, remove the five (5) cap
screws, cover, and gasket
2. Remove the 15/16” nut that secures the range yoke
bar.
3. Remove the 3/4” nut on the reduction yoke bar.
4. Remove the cylinder housing and gasket.
To Next Page
Loading...
