176
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
VCS/VMS Combination Cylinder | Disassembly and Assembly TRSM0940
Procedure – Combination Cylinder Assembly -
VCS, VMS
1. Install the small O-Ring in the Range and Reduction
cylinder housing bores. Lightly lubricate O-rings with
Eaton® silicone lubricant #71206 or equivalent.
2. Install the Range and Reduction Piston O-rings on the
pistons’ I.D. and O.D. Lightly lubricate O-rings with
Eaton® silicone lubricant #71206 or equivalent.
To Next Page
Loading...