Eaton FS-6105 - Reassembly - Transmission; Reassembly and Installation of Countershaft and Reverse Idler

REASSEMBLY - TRANSMISSION
Reassembly and Installation of Countershaft and Reverse Idler
1. Pc ess 2nd gear on Qountershall
hub of gear to f' r ont of shaf1 ,
as shown, long
2. Press 3rd speed cea1 on countershaft, long
gear to rear ot shaft.
3 7
, .. .,
3. Install 4th and 5th speed gear keys on coun·
lershaft {h1s e 1) . Allgn keyway of 4th &peed gear to
key on shaft. Press 4th gear on long hub of gear
10 tron1 of sha ft
4. Remove 5th speed key from countershaf1 and In·
stall spacer (lnsel). Re- tnsta JI key and align key·
\Vay of 5th speed gear wi th lcey on countersnatt.
Pt ess 5th speed gear on shaft , l ong hub of gea r to
re ar ot shaJt.