Eaton i-on User Manual

i-on40 & i-onEX Range 4. Administration
Page 99
13. Press  repeatedly to leave the
menu.
The control unit will let you delete all remote controls in one operation.
Think carefully before you use this feature.
To delete all remotes:
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  until you see:.


5. Press .


6. Press  until the display shows:


7. Press .


8. Press  until the display shows:


9. Press .
The display shows:
(Press  if you decide you do NOT
want to delete all remotes.)


10. Press .
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


followed by


11. Press  repeatedly to leave the
menu.
To register remote controls with users once again enter the Menu and
select Users - Edit User (see page 47).

Eaton i-on Specifications

General

Brand	Eaton
Model	i-on
Category	Security System
Language	English