Eaton i-on User Manual

4. Administration i-on40 & i-onEX Range
Page 38
2. Press .


3. Key in your access code (or
present a tag).


4. Press .
The bottom line of the display
shows the first of a list of zones
that you may omit. (Either as a
zone number or as a name, if the
Installer has programmed one for
the zone.)


Note: If you see the message “No zones
omittable” then the installer has
not programmed the system to
allow you to omit zones.
5. Press  or  to display the zone
you wish to omit.


6. Press  to mark the zone for
omission.
The character at the end of the line
changes to an "O" to show that the
zone will be Omitted.


If you change your mind then press
 again so that the end of the line
shows an "I" (for Included).
7. Repeat steps 5 and 6 for any other
zone you wish to omit (or include).
8. Press  to store the changes you
have made.
The keypad gives a double “beep”
confirmation tone.


9. Press  to leave the Menu.
The keypad gives a double “beep”
confirmation tone.



Eaton i-on Specifications

General

Brand	Eaton
Model	i-on
Category	Security System
Language	English