i-on40 & i-onEX Range 4. Administration
Page 57
3. Key in your access code (or
present a tag).
4. Press until you see:.
5. Press .
The display shows the most recent
event recorded in the log.
6. Press to see a more detailed
description of the event.
The display will show, for example,
the name you keyed in for a user.
7. Press or to scroll through the
log.
shows older events, shows
more recent events.
8. Press to finish viewing the log.
When you view the log, the display initially shows users by their number
(for example User 001). Pressing displays any name programmed for
the user. There are some user numbers that have special meaning:
Note: The word “Web” will appear in the log entry if the installer logged on
using the web browser.