Eaton i-on User Manual

i-on40 & i-onEX Range 4. Administration
Page 85
Note: The display on the i-on40 will look
simpler for example:
However, the sequence of key
presses is the same for all i-on
control units.


8. Press  or  to display the output
you wish to edit.


9. Press .
The bottom line of the display
shows the first option that you can
edit for the output: “Name”.


10. Press .
The display shows the current
name of the output, and places a
cursor at the beginning of the
name.


11. Key in a meaningful name for the
output. (Hint: see Editing Text on
page 37.)
The name you give the output
appears in all the other menus the
display offers for controlling
outputs.


12. Press .
The keypad gives a double “beep”
confirmation tone. The display
returns to the Name option.


13. Press 
The display shows:


14. Press .
There are two options to “Latched”.
“Yes”. The output stays on until a
user deliberately turns it off. In



Eaton i-on Specifications

General

Brand	Eaton
Model	i-on
Category	Security System
Language	English