User Menu Options
Page 38
In a partitioned system, specify the partition that your two-way remote
control can set, unset, etc. (not available for a one-way remote
control).
Enable or disable access to the SecureConnect app.
Change your remote password.
Please refer to the following section for more details of the options.
Using the Users option
To edit user details:
1. Select Users.
2. If you are a master or admin user, select Edit User.
Note: You can press * to alternate between displaying user numbers
and names.
3. Press or followed by to select the user you wish to edit.
Alternatively, enter the user number (e.g. 004) and press .
4. Press or followed by to select the option you require:
Name To change the user name.
Type To change the user type. See page 2 for a
description of each user type.
Partitions To change the partitions that the user belongs to
(partitioned systems only). You cannot change
the partitions allocated to a master user, since
master users always belong to all partitions.
Every user must belong to at least one partition.
Code To change your own access code.
Prox Tag To add or delete your own proximity tag.
Remote To add or delete your own remote control.
If you are using a partitioned system and a two-
way remote control, you can use the Remote
Partition option to specify the partition that the
remote control can set, unset, etc. Use or to
scroll through the partitions, and to choose
Yes or No. Press on completion.
To Next Page
Loading...
