User Menu Options
Page 39
Use Delete Remote to delete your remote control
if it has been lost.
Hold Up Device To add or delete your own hold-up device.
Medical Pendant To add or delete your own medical pendant.
Social Care To add or delete your own social-care pendant.
Remote Password To change your own remote-access password to
access the web interface, or to set the remote-
access password for a BMS or level-4 user. This
is available only if the user who added you gave
you permission to access the web interface by
specifying a remote password.
App access To enable or disable use of the SecureConnect
mobile app. This option is not available for users
of type Set/Unset.
5. Follow the prompts. Please refer to "Adding users" on page 34 if you
need information about how to use any of the above options.
Deleting users
If you are a master or admin user, you can use the Users – Delete User
option to delete users.
Once you delete a user, the system does not respond to their access code.
The control unit also deletes the identity of any proximity tag, remote
control, hold-up device, medical pendant or social-care pendant assigned
to the user.
Note: You cannot delete User 001 (the default master user).
To delete a user:
1. Select Users – Delete User.
Note: You can press * to alternate between displaying user numbers
and names.
2. Press or followed by to select the user you wish to delete.
Alternatively, enter the user number (e.g. 004) and press .
You will see (for example):
To Next Page
Loading...
