Eaton KA146W5 - Ka146 W2 Tank-Lifting Windlass; Parts List

KA146W2 tank-lifting windlass
Figure 3. Exploded view and parts list for KA146W2 tank-lifting windlass.
Table 3. Parts List for KA146W2 Tank-Lifting Windlass
Item Description Part No. Qty
1 Hex bolt, 1/2—13 x 1 inch KP1085 4
2 1/2-inch lockwasher KP1107 4
3 Hex nut,1/2—13 KP1214 2
4 Gear box and spool assembly KA151W 1
5 Spool and cable clamp assembly KA15CE1 1
6 Pipe KP1054CE11 1
7 Roll pin, 7/32 x 1-1/4-inch KP1313 4
8 Support angle KP294W 1
9 Flat washer between sheave brackets
and head-casting flange
KP3015A28 2
10 Sheave bracket assembly, right hand KA148W 1
11 Sheave bracket assembly,left hand KA147W 1
12 Adapter (for upper sheave bracket
when ground connector is on recloser
head)
KP293W 1
13 Sheave assembly KA121 R 2
14 Cable assembly KA592R3 2
15 Crank KP1031 R 1
16 Hex bolt, 1/2—13 x 1-1/2 inch KP1354 2
5KA146W5 AND KA146W2 ASSEMBLY AND INSTALLATION INSTRUCTIONS MN280039EN