Eaton KK650 User Manual

8
INM MTL SUM5 Rev 7
DRAFT - 09 June 2021 DRAFT - 09 June 2021
2.2.14 WD Watchdog Relay
A Watchdog Relay is available as standard to provide a signal to a 3rd party device to
indicate a fault has been detected within the annunciator. The following options can be
congured in software.
• All faults.
• Field contact fault.
• System fault.
• Comm’s fault.
• Card fault.
• LED fault.
• Power fault.
Typical Volt Free Relay Contact Outputs
WARNING !
Hazardous voltages may exist on the rear panel connections when connectors are
removed. Take care not to touch any exposed parts

Eaton KK650 Specifications

General

Brand	Eaton
Model	KK650
Category	Lighting Equipment
Language	English