Eaton MEMSHIELD 4 - Form 4 Type 6 Compartmentalised Outgoing Modules; EM4 PBCKN Series Modules; Form 4 Type 6 Incoming Module

Form 4 Type 6 Compartmentalised Outgoing Modules
EM4PBCKN126, EM4PBCKN146, EM4PBCKN246
Fit compartment with 7 x M5 fixings (Example EM4PBCKN246)
Fit cover
with 8 x M5
fixings
Adaptor Assembly –
1. Interphase barriers to mccb
2. Type 6 shield to carriage
3. Extension palms to mccb
Prepare Adaptor
NZM2
NZM1 4P
NZM1 SPN
EM4PBCKN246
EM4PBCKN146
EM4PBCKN126
Form 4 Type 6 Compartmentalised Incoming Module EM4PB40CKINC
Remove cut out -
Bottom Fed
Top Fed
Assemble incoming palms to
device. Slide shield over
connectors and interphase
barriers, fix in place with 4 x M5.
Fit device type 6 shield and finish
with fitting incoming kit shield
14Nm
9Nm
15Nm
15Nm
31Nm
31Nm